Grand opening promotion: 10% OFF all products with code choice10

Can You Make CBD Oils at Home?

A close up of a small hemp plant leaf

Have you ever wondered about making CBD oil at home? With cannabidiol (CBD) quickly becoming a household name, it’s not surprising that many people out there are interested in preparing their own oils and tinctures.

Read this informative guide to learn about how CBD oil is made. That way you can make an informed decision on whether the time, effort, and money is worth it to you.

What Is CBD Oil?

Before you start getting out your kitchen supplies, it’s important that you understand what CBD oil is. After all, knowledge is the key to successful results. CBD is one of the 85 or so compounds called cannabinoids that are found in the cannabis plant.

Now, if you’re considering making CBD oil at home, you probably know that CBD is related to THC (the cannabinoid that gets you ‘high’ when smoking or ingesting marijuana. However, it’s important that you also recognize the key differences between CBD and THC.

CBD can be made from the marijuana plant or the hemp plant. CBD that’s extracted from marijuana plants also contains THC, so it produces psychoactive effects and it may also be illegal depending on where you live.

The hemp plant — while still related to the marijuana plant — is very different in many ways. The big difference is that hemp plants contain less than 0.3% THC, compared to marijuana that typically contains around 30% or more.

If you’re thinking about making CBD oil at home, it’s important that you use hemp plants, unless you live in a state where marijuana is legal and you want to make a full-spectrum tincture that delivers the psychotropic effects associated with marijuana. It’s worth noting that if you use marijuana, the powerful effects of THC is likely to cloud the more subtle effects of CBD.

Acquiring Hemp

So now that you understand that you need to use hemp plants to extract pure CBD, you need to be able to acquire hemp plants. The Farm Bill made hemp legal on a federal level in December of 2018. That said, there may be state regulations that prohibit you from growing or obtaining hemp plants without proper credentials.

So, if you’re looking into making CBD oil at home, the first step is to determine if it’s actually feasible for you to obtain hemp plants. Of course, if you already have hemp plants, you’re good to go. The reality is that most people simply don’t have access to hemp, which is why buying pre-made CBD oil is usually the preferred route.

Before you start making CBD oil, be sure to check your local laws thoroughly. You never know when there might be red tape, and the last thing you want is to have legal problems because of an innocent mistake.

How CBD Is Extracted

So now you (hypothetically) have your hemp. What’s next? There are three common methods for extracting CBD:

  • Oil method: Hemp is simmered slowly in a carrier oil
  • CO2 Method: Hemp is exposed to extreme pressure and low temperatures to extract CBD in its purest isolate form
  • Ethanol Method: Hemp is simmered slowly in grain alcohol and then the infused alcohol is blended with a carrier oil

Most people who are making CBD oil at home use the oil method because it’s the easiest and requires the least amount of technical knowledge and equipment. The ethanol method has the potential to be dangerous and the CO2 method requires lab equipment that the average person doesn’t own or have access to.

How to Extract CBD in Oil

The easiest way to make your own CBD oil is simply to simmer it in a carrier oil. The fat in the oil clings to the CBD molecules, leaving you with a CBD-infused oil when all is said and done.

Close up of spices in a porcelain bowl

If you want to try making CBD oil at home, here are the basic steps:

  1. Grind up one ounce of plant material finely
  2. Spread the plant material on a cookie tray and in an oven at 220-225 degrees Fahrenheit
  3. Leave it in the oven for approximately one hour to activate the CDB (this is called decarboxylating)
  4. Place the decarbed plant material in a crockpot
  5. Add 16 ounces of coconut oil, olive oil, or your carrier oil of choice
  6. Simmer the mixture for 2-3 hours (or longer)
  7. Check it and give it a quick stir every half hour or so
  8. The mixture is ready when it’s a deep brown-green color
  9. Wait for the mixture to cool
  10. Run the mixture through a cheesecloth to strain out all the plant matter

Is It Worth It?

While making CBD oil at home can be a fun and rewarding project, most people find that it’s easier, more convenient, and often more affordable to simply buy pre-made oils and tinctures. Obtaining raw hemp plants can be extremely difficult, and the finished product may vary in quality.

These days, pure CBD oil is surprisingly affordable, and you have the benefit of knowing exactly what you’re getting. You can even request certificates of analysis that let you know exactly how much CBD is in your oil, as well as information on strains, purity, and other vital information.

Shop the Best CBD Oil Today

Here at CBD Choice, we proudly carry the best selection of premium CBD oil so you don’t have to worry about making CBD oil at home. All of our products are in stock and ready to ship fast. If you have any questions about any of our products, please contact us now, and our product specialists will be happy to assist you with your order. Save on quality CBD from trusted brands.

Leave a Reply